Service Repair Parts

E-828 HI Frequency Driver Bag End Replacement Part for the Opal2 and Crystal2 Gem series high output installation loudspeaker systems

E-6XA 6″ Coaxial Loudspeaker, Bag End Part
For the M-6 and powered PM-6 Single 6.5 2-Way
Time Align Coaxial Studio Monitors with 6 Year Warranty

Service Replacement 10” 8 Ohm Speaker, this has been replaced by the E-10BSRP

Service Replacement 10” Coax 8 Ohm Speaker, this has been replaced by the E-10XBSRP

Service Replacement 12” 8 Ohm Speaker, this has been replaced by the E-12FSRP

Service Replacement 15” Coax 8 Ohm Speaker, this has been replaced by the E-15XASRP

Service Replacement 10” INFRA 8 Ohm Speaker

Service Replacement 12” INFRA 4 Ohm Speaker

EL-18ASRP – Bag End Service Replacement Part for an 18”, INFRA, 8 Ohm Speaker

Bag End Service Replacement 18” INFRA 4 Ohm Speaker

SE-1280SRP – Bag End Service Replacement Part for a 12”, 8 Ohm Speaker

E-10BSRP – 10″ 8 Ohm Speaker, Bag End Service Replacement Part, 1 Year Warranty.

E-10XBSRP – Service Replacement 10″ C0ax 8 Ohm Speaker

E-12FSRP Bag End 12” 8 Ohm Speaker

Service Replacement Part, for the Opals, Crystal2, and the 12″ Musical Instrument Loudspeaker Systems

E-15XASRP Service Replacement Speaker,
15” Coax, 8 Ohm,
for the 15″ Musical Instrument Coax AX-HI Driver speaker systems

E-10FSRP 10″ Neo Lite Low Frequency Loudspeaker, Bag End Replacement Part

15” 8 Ohm Speaker
Service Replacement Part
One Year Warranty

10″ Loudspeaker. Replaces E-10

2022 E-10B replaces the E-10A

E-10F – 10″ Neo Lite Low Frequency Loudspeaker

10″ Coaxial Loudspeaker (replaces E-10X), this has now been replaced by the E-10XB

E-12 – 12″ Mid/Bass Loudspeaker

E-12F – 12″ Neo Lite Low Frequency Loudspeaker

15″ Neo Lite Low Frequency Loudspeaker. Replacement part for the Neptune 15″

E-15X is a 15″ Coaxial Loudspeaker, this has been replaced by the E-15XA

E-6A – 6″ Loudspeaker, Bag End Replacement Part

E-8A – 8″ Loudspeaker, Bag End Replacement Part

EL-10 – 10” Ext Low INFRA Loudspeaker, 8 Ohm

EL-12B – 12” Ext Low INFRA Loudspeaker, 4 Ohm

EL-18A – 18” Ext Low INFRA Loudspeaker, 8 Ohm

EL-18R 18” Ext Low INFRA Loudspeaker, 4 Ohm

SE-1280 12″ Mid/Bass Bag End Loudspeaker. Replaces SE-1260

E-18C Speaker CER 18″ 8 ohms

E-15E Bag End 15″ Low Frequency Loudspeaker for CDS-215

E-5A Loudspeaker 4.5”

E-10B 10″ Loudspeaker, Bag End Replacement Part with 6 Year Warranty.

E-10XB 10″ Coaxial Loudspeaker (replaces E-10X and E-10XA) Bag End Part, 6 Year Warranty, found in Double and Quad 10 Nebula Series Loudspeakers

E-15XA is a Coaxial Loudspeaker with 6 year warranty

E-12F 12″ Neo Lite Low Frequency Loudspeaker with a 6 year warranty

15″ Low Frequency Loudspeaker Replacement Part, 6 year warranty

E-10 10″ Loudspeaker, Obsolete

EL-21A Professional Transducer

Loudspeaker CD Tweeter (OBSOLETE)
This was used in discontinued models TA12C, TA12JRC, TA15-I, D10BX-D

LSDM-35 – 35mm Cast Round Stand Cup

U-Bracket for Mounting
(Shown with the TA80-T, trapezoidal, installation, full range loudspeaker system)

Yoke CD12 is compatible with speaker models, CDS-112 and the OPAL2.

The Yoke CD15 is compatible with speaker model CDS-115.

The Yoke D10 is compatible with speaker model D10E-I.

The Yoke D12 is compatible with Bag End speaker model D12E-I.

The Yoke TA5 is compatible with Bag End speaker model TA5002.

Yoke TA6I is compatible with Bag End speaker model TA6002-I

The Yoke TA6S is compatible with bag end speaker model TA6002-S.

Bag End Yokes utilize fixed width mounting arms with open slotted attachment points.  This allows the loudspeaker to be easily and quickly installed by a single installer.

Our mounting hole pattern allows multiple configurations for locating the speaker. The Yoke can be attached to walls, ceilings, balcony overhangs, trusses, bars, beams, threaded rods and cable assemblies.

EL-18ARCK Recone Kit

12 Volt DC Power Supply , 120 VAC to 12 VDC

8Ft Power Cord Edison/IEC

Z-816 9ft. Power Cord Lock 18/3 SVT

CK-5 14 Piece Single Speaker Mounting Kit

Jackplate Assy – CDS-215

Speak On Jack Plate Assembly
4″ x 5″

Barrier Strip – Install Models

Amplifier Minima One Pre-amp Only

Jackplate Cup, Only Used on M-6

Jackplate Assembly – CD, CDS Series (Venus and Neptune Models)

Z-352 Jackplate Assembly – CD/CDS BASS Series

Z-368 Bag End Dual Speak On Jackplate Assembly,
4″ x 7″
Service Repair Part

1.4” Throat Loudspeaker Horn

1” Throat Loudspeaker Horn

E-601 – 1” Throat Loudspeaker Horn

E-808 Horn, 60 X 90 REV 4.3 Horn

2 Pcs Extended Grip Recessed Handles W/Screws and Gasket

Single Handle Black

Handle Bar with Logoplate

2Pt Internal Flying Brackets W/ Bolts

2Pt METRIC Internal Flying Brackets W/ Bolts

3Pt Internal Flying Brackets W/ Bolts

4Pt Internal Flying Brackets W/ Bolts

6Pt Internal Flying Brackets W/ Bolts

8Pt Internal Flying Brackets W/ Bolts

E-100 HI Frequency Driver

E-500 HI Frequency Driver

E-550 HI Frequency Driver

E-700 HI Frequency Driver

Compression Driver NEO 1.4, 16 Ohms

E-250 Hi Frequency Driver, Bag End Replacement Part

Bag End E-140 HI Frequency Driver

E-100 Diaphragm

E-500 Diaphragm

E-550 DK Diaphragm

E-600DK Diaphragm

E-700 Diaphragm

E-828DK Diaphragm, Bag End Replacement Part for the Opal2 and Crystal2 Gem Series

E-806DK Diaphragm, Bag End Replacement Part for the CDS and Gem Series Speakers

E-250DK Bag End Diaphragm, one year warranty

AFX-1 Passive Crossover

AFX-LO Passive Crossover

Passive Crossover, has been replaced by the CX-4

M6X0-4 Passive Crossover, this has been replaced with the M6X0-5

T2002X-I Passive Crossover

Passive Crossover (replaced TA15X-1)

Passive Crossover

Passive Crossover

CTX-5 Crossover – Crystal/Opal

J12X-2 Crossover for Bag End TA12JR (OBSOLETE)

T12X-2 Crossover for Bag End TA12 (OBSOLETE)

CDS10HIX-1 Crossover for Bag End Neptune Series CDS-110 High

CDS-112 High –  Crossover

CDS-115 High – crossover

CDS-110 Low – crossover

CDS-112 Low – Bag End Crossover

CDS15LOWX-1 – CDS-115 Low Bag End crossover for Neptune

CX-4 Passive Crossover

M6X0-5 Passive Crossover for the M-6 and PM-6

T5002X-2 Passive Crossover, Bag End replacement part

Bracket for mounting Bag End Loudspeakers

8 Pcs Large Chevron Stacking Corners W/ Screws

8 Pcs 3/8″ Rubber Feet W/ Screws

Deep Red Carpet – 1 Square Yard

Cloth-B Black Cloth Grille Material

1Pc 660mm/25.98”L / 35mm/1.38″W Steel Tube

1Pc 1.2m/47”L / 35mm/1.38″W Steel Tube

Z-240 1 Pc Domed Logo

Z-347 Logo 76.25MM Metal Nameplate

Logo 61MM Metal Nameplate

1Pc Large Logo 2.75” X 5.25”

5 Pcs – Mini Logo 3/4” X 1 1/4”

1 Pc Small Logo 1.25” X 2.25”

P-300 300 Amp and F1 Preamp assembly

P-700 Bag End 700 Amp and F1 Preamp Assembly

P-MO Bag End MO Amp and F1 Preamp Assembly

X2-700 Bag End 700 Amp and x2 Preamp Assembly

IP-300 Bag End Infra 300 App and F1 Amp Assembly

IP-700

Bag End 700 Amp and F1 Preamp Assembly
Replacement part for the IPD10E-I, IPS12E-N and IPS18E-N

IP-MO Bag End Infra Powered MO Amp and F1 Preamp Assembly