Service Repair Parts

AFX-1 Passive Crossover

AFX-LO Passive Crossover

8 Pcs Large Chevron Stacking Corners W/ Screws

Deep Red Carpet – 1 Square Yard

CK-5 14 Piece Single Speaker Mounting Kit

Cloth-B Black Cloth Grille Material

CTX-5 Crossover – Crystal/Opal

Passive Crossover, has been replaced by the CX-4

CX-4 Passive Crossover

E-100 HI Frequency Driver

E-100 Diaphragm

E-10B 10″ Loudspeaker, Bag End Replacement Part with 6 Year Warranty.

E-10BSRP – 10″ 8 Ohm Speaker, Bag End Service Replacement Part, 1 Year Warranty.

E-10F – 10″ Neo Lite Low Frequency Loudspeaker

E-10FSRP 10″ Neo Lite Low Frequency Loudspeaker, Bag End Replacement Part

E-10XB 10″ Coaxial Loudspeaker (replaces E-10X and E-10XA) Bag End Part, 6 Year Warranty, found in Double and Quad 10 Nebula Series Loudspeakers

E-10XBSRP – Service Replacement 10″ C0ax 8 Ohm Speaker

E-12F – 12″ Neo Lite Low Frequency Loudspeaker

E-12F 12″ Neo Lite Low Frequency Loudspeaker with a 6 year warranty

E-12FSRP Bag End 12” 8 Ohm Speaker

Service Replacement Part, for the Opals, Crystal2, and the 12″ Musical Instrument Loudspeaker Systems

1.4” Throat Loudspeaker Horn

15″ Low Frequency Loudspeaker Replacement Part, 6 year warranty

15” 8 Ohm Speaker
Service Replacement Part
One Year Warranty

15″ Neo Lite Low Frequency Loudspeaker. Replacement part for the Neptune 15″

E-15XA is a Coaxial Loudspeaker with 6 year warranty

E-15XASRP Service Replacement Speaker,
15” Coax, 8 Ohm,
for the 15″ Musical Instrument Coax AX-HI Driver speaker systems

E-250 Hi Frequency Driver, Bag End Replacement Part

E-500 HI Frequency Driver

E-500 Diaphragm

1” Throat Loudspeaker Horn

E-550 HI Frequency Driver

E-550 DK Diaphragm

E-5A Loudspeaker 4.5”

E-601 – 1” Throat Loudspeaker Horn

E-6A – 6″ Loudspeaker, Bag End Replacement Part

E-6XA 6″ Coaxial Loudspeaker, Bag End Part
For the M-6 and powered PM-6 Single 6.5 2-Way
Time Align Coaxial Studio Monitors with 6 Year Warranty

E-700 HI Frequency Driver

E-700 Diaphragm

E-806DK Diaphragm, Bag End Replacement Part for the CDS and Gem Series Speakers

E-828DK Diaphragm, Bag End Replacement Part for the Opal2 and Crystal2 Gem Series

E-8A – 8″ Loudspeaker, Bag End Replacement Part

EL-10 – 10” Ext Low INFRA Loudspeaker, 8 Ohm

Service Replacement 10” INFRA 8 Ohm Speaker

EL-12B – 12” Ext Low INFRA Loudspeaker, 4 Ohm

Service Replacement 12” INFRA 4 Ohm Speaker

EL-18A – 18” Ext Low INFRA Loudspeaker, 8 Ohm

EL-18ARCK Recone Kit

EL-18ASRP – Bag End Service Replacement Part for an 18”, INFRA, 8 Ohm Speaker

EL-18R 18” Ext Low INFRA Loudspeaker, 4 Ohm

Bag End Service Replacement 18” INFRA 4 Ohm Speaker

2Pt Internal Flying Brackets W/ Bolts

2Pt METRIC Internal Flying Brackets W/ Bolts

3Pt Internal Flying Brackets W/ Bolts

4Pt Internal Flying Brackets W/ Bolts

6Pt Internal Flying Brackets W/ Bolts

8Pt Internal Flying Brackets W/ Bolts

8 Pcs 3/8″ Rubber Feet W/ Screws

Single Handle Black

2 Pcs Extended Grip Recessed Handles W/Screws and Gasket

J12X-2 Crossover for Bag End TA12JR (OBSOLETE)

LSDM-35 – 35mm Cast Round Stand Cup

M6X0-5 Passive Crossover for the M-6 and PM-6

12 Volt DC Power Supply , 120 VAC to 12 VDC

SE-1280 12″ Mid/Bass Bag End Loudspeaker. Replaces SE-1260

SE-1280SRP – Bag End Service Replacement Part for a 12”, 8 Ohm Speaker

T2002X-I Passive Crossover

Passive Crossover (replaced TA15X-1)

T5002X-2 Passive Crossover, Bag End replacement part

Passive Crossover

Passive Crossover

1Pc 660mm/25.98”L / 35mm/1.38″W Steel Tube

1Pc 1.2m/47”L / 35mm/1.38″W Steel Tube

X2-700 Bag End 700 Amp and x2 Preamp Assembly

Z-240 1 Pc Domed Logo

1Pc Large Logo 2.75” X 5.25”

5 Pcs – Mini Logo 3/4” X 1 1/4”

1 Pc Small Logo 1.25” X 2.25”

Z-347 Logo 76.25MM Metal Nameplate

Logo 61MM Metal Nameplate

Speak On Jack Plate Assembly
4″ x 5″

Z-368 Bag End Dual Speak On Jackplate Assembly,
4″ x 7″
Service Repair Part

8Ft Power Cord Edison/IEC

Z-816 9ft. Power Cord Lock 18/3 SVT

Barrier Strip – Install Models

Bracket for mounting Bag End Loudspeakers

CDS10HIX-1 Crossover for Bag End Neptune Series CDS-110 High

CDS-110 Low – crossover

CDS-112 High –  Crossover

CDS-112 Low – Bag End Crossover

CDS-115 High – crossover

CDS15LOWX-1 – CDS-115 Low Bag End crossover for Neptune

E-10 10″ Loudspeaker, Obsolete

10″ Loudspeaker. Replaces E-10

2022 E-10B replaces the E-10A

Service Replacement 10” 8 Ohm Speaker, this has been replaced by the E-10BSRP

10″ Coaxial Loudspeaker (replaces E-10X), this has now been replaced by the E-10XB

Service Replacement 10” Coax 8 Ohm Speaker, this has been replaced by the E-10XBSRP

E-12 – 12″ Mid/Bass Loudspeaker

Service Replacement 12” 8 Ohm Speaker, this has been replaced by the E-12FSRP

Bag End E-140 HI Frequency Driver

E-15E Bag End 15″ Low Frequency Loudspeaker for CDS-215

E-15X is a 15″ Coaxial Loudspeaker, this has been replaced by the E-15XA

Service Replacement 15” Coax 8 Ohm Speaker, this has been replaced by the E-15XASRP

E-18C Speaker CER 18″ 8 ohms

E-250DK Bag End Diaphragm, one year warranty

Loudspeaker CD Tweeter (OBSOLETE)
This was used in discontinued models TA12C, TA12JRC, TA15-I, D10BX-D

E-600DK Diaphragm

Compression Driver NEO 1.4, 16 Ohms

E-808 Horn, 60 X 90 REV 4.3 Horn

E-828 HI Frequency Driver Bag End Replacement Part for the Opal2 and Crystal2 Gem series high output installation loudspeaker systems

EL-21A Professional Transducer

Handle Bar with Logoplate

IP-300 Bag End Infra 300 App and F1 Amp Assembly

IP-700

Bag End 700 Amp and F1 Preamp Assembly
Replacement part for the IPD10E-I, IPS12E-N and IPS18E-N

IP-MO Bag End Infra Powered MO Amp and F1 Preamp Assembly

M6X0-4 Passive Crossover, this has been replaced with the M6X0-5

Amplifier Minima One Pre-amp Only

P-300 300 Amp and F1 Preamp assembly

P-700 Bag End 700 Amp and F1 Preamp Assembly

P-MO Bag End MO Amp and F1 Preamp Assembly

T12X-2 Crossover for Bag End TA12 (OBSOLETE)

Yoke CD12 is compatible with speaker models, CDS-112 and the OPAL2.

The Yoke CD15 is compatible with speaker model CDS-115.

The Yoke D10 is compatible with speaker model D10E-I.

The Yoke D12 is compatible with Bag End speaker model D12E-I.

The Yoke TA5 is compatible with Bag End speaker model TA5002.

Yoke TA6I is compatible with Bag End speaker model TA6002-I

The Yoke TA6S is compatible with bag end speaker model TA6002-S.

U-Bracket for Mounting
(Shown with the TA80-T, trapezoidal, installation, full range loudspeaker system)

Bag End Yokes utilize fixed width mounting arms with open slotted attachment points.  This allows the loudspeaker to be easily and quickly installed by a single installer.

Our mounting hole pattern allows multiple configurations for locating the speaker. The Yoke can be attached to walls, ceilings, balcony overhangs, trusses, bars, beams, threaded rods and cable assemblies.

Jackplate Cup, Only Used on M-6

Jackplate Assembly – CD, CDS Series (Venus and Neptune Models)

Z-352 Jackplate Assembly – CD/CDS BASS Series

Jackplate Assy – CDS-215