Service Repair Parts

AFX-1 Passive Crossover

AFX-LO Passive Crossover

8 Pcs Large Chevron Stacking Corners W/ Screws

Deep Red Carpet – 1 Square Yard

CK-5 14 Piece Single Speaker Mounting Kit

Cloth-B Black Cloth Grille Material

CTX-5 Crossover – Crystal/Opal

Passive Crossover, has been replaced by the CX-4

CX-4 Passive Crossover

E-100 HI Frequency Driver

E-100 Diaphragm

E-10B 10″ Loudspeaker, Bag End Replacement Part with 6 Year Warranty.

E-10BSRP – 10″ 8 Ohm Speaker, Bag End Service Replacement Part, 1 Year Warranty.

E-10F – 10″ Neo Lite Low Frequency Loudspeaker

E-10FSRP 10″ Neo Lite Low Frequency Loudspeaker, Bag End Replacement Part

E-10XB 10″ Coaxial Loudspeaker (replaces E-10X and E-10XA) Bag End Part, 6 Year Warranty, found in Double and Quad 10 Nebula Series Loudspeakers

E-10XBSRP – Service Replacement 10″ C0ax 8 Ohm Speaker

E-12F – 12″ Neo Lite Low Frequency Loudspeaker

E-12F 12″ Neo Lite Low Frequency Loudspeaker with a 6 year warranty

E-12FSRP Bag End 12” 8 Ohm Speaker

Service Replacement Part, for the Opals, Crystal2, and the 12″ Musical Instrument Loudspeaker Systems

1.4” Throat Loudspeaker Horn

15″ Low Frequency Loudspeaker Replacement Part, 6 year warranty

15” 8 Ohm Speaker
Service Replacement Part
One Year Warranty

15″ Neo Lite Low Frequency Loudspeaker. Replacement part for the Neptune 15″

E-15XA is a Coaxial Loudspeaker with 6 year warranty

E-15XASRP Service Replacement Speaker,
15” Coax, 8 Ohm,
for the 15″ Musical Instrument Coax AX-HI Driver speaker systems

E-250 Hi Frequency Driver, Bag End Replacement Part

E-500 HI Frequency Driver

1” Throat Loudspeaker Horn

E-550 HI Frequency Driver

E-550 DK Diaphragm

E-5A Loudspeaker 4.5”

E-601 – 1” Throat Loudspeaker Horn

E-6A – 6″ Loudspeaker, Bag End Replacement Part

E-6XA 6″ Coaxial Loudspeaker, Bag End Part
For the M-6 and powered PM-6 Single 6.5 2-Way
Time Align Coaxial Studio Monitors with 6 Year Warranty

E-700 HI Frequency Driver

E-700 Diaphragm

E-806DK Diaphragm, Bag End Replacement Part for the CDS and Gem Series Speakers

E-828DK Diaphragm, Bag End Replacement Part for the Opal2 and Crystal2 Gem Series

E-8A – 8″ Loudspeaker, Bag End Replacement Part

EL-10 – 10” Ext Low INFRA Loudspeaker, 8 Ohm

Service Replacement 10” INFRA 8 Ohm Speaker

EL-12B – 12” Ext Low INFRA Loudspeaker, 4 Ohm

Service Replacement 12” INFRA 4 Ohm Speaker

EL-18A – 18” Ext Low INFRA Loudspeaker, 8 Ohm

EL-18ARCK Recone Kit

EL-18ASRP – Bag End Service Replacement Part for an 18”, INFRA, 8 Ohm Speaker

EL-18R 18” Ext Low INFRA Loudspeaker, 4 Ohm

Bag End Service Replacement 18” INFRA 4 Ohm Speaker

2Pt Internal Flying Brackets W/ Bolts

2Pt METRIC Internal Flying Brackets W/ Bolts

3Pt Internal Flying Brackets W/ Bolts

4Pt Internal Flying Brackets W/ Bolts

6Pt Internal Flying Brackets W/ Bolts

8Pt Internal Flying Brackets W/ Bolts

8 Pcs 3/8″ Rubber Feet W/ Screws

Single Handle Black

2 Pcs Extended Grip Recessed Handles W/Screws and Gasket

J12X-2 Crossover for Bag End TA12JR (OBSOLETE)

LSDM-35 – 35mm Cast Round Stand Cup

M6X0-5 Passive Crossover for the M-6 and PM-6

12 Volt DC Power Supply , 120 VAC to 12 VDC

SE-1280 12″ Mid/Bass Bag End Loudspeaker. Replaces SE-1260

SE-1280SRP – Bag End Service Replacement Part for a 12”, 8 Ohm Speaker

T2002X-I Passive Crossover

Passive Crossover (replaced TA15X-1)

T5002X-2 Passive Crossover, Bag End replacement part

Passive Crossover

Passive Crossover

1Pc 660mm/25.98”L / 35mm/1.38″W Steel Tube

1Pc 1.2m/47”L / 35mm/1.38″W Steel Tube

X2-700 Bag End 700 Amp and x2 Preamp Assembly

Z-240 1 Pc Domed Logo

1Pc Large Logo 2.75” X 5.25”

5 Pcs – Mini Logo 3/4” X 1 1/4”

1 Pc Small Logo 1.25” X 2.25”

Z-347 Logo 76.25MM Metal Nameplate

Logo 61MM Metal Nameplate

Z-368 Bag End Dual Speak On Jackplate Assembly,
4″ x 7″
Please Specify Speaker Model When Ordering

8Ft Power Cord Edison/IEC

Z-816 9ft. Power Cord Lock 18/3 SVT

Barrier Strip – Install Models

Bracket for mounting Bag End Loudspeakers

CDS10HIX-1 Crossover for Bag End Neptune Series CDS-110 High

CDS-110 Low – crossover

CDS-112 High –  Crossover

CDS-112 Low – Bag End Crossover

CDS-115 High – crossover

CDS15LOWX-1 – CDS-115 Low Bag End crossover for Neptune

E-10 10″ Loudspeaker, Obsolete

10″ Loudspeaker. Replaces E-10

2022 E-10B replaces the E-10A

Service Replacement 10” 8 Ohm Speaker, this has been replaced by the E-10BSRP

10″ Coaxial Loudspeaker (replaces E-10X), this has now been replaced by the E-10XB

Service Replacement 10” Coax 8 Ohm Speaker, this has been replaced by the E-10XBSRP

E-12 – 12″ Mid/Bass Loudspeaker

Service Replacement 12” 8 Ohm Speaker, this has been replaced by the E-12FSRP

Bag End E-140 HI Frequency Driver

E-15E Bag End 15″ Low Frequency Loudspeaker for CDS-215

E-15X is a 15″ Coaxial Loudspeaker, this has been replaced by the E-15XA

Service Replacement 15” Coax 8 Ohm Speaker, this has been replaced by the E-15XASRP

E-18C Speaker CER 18″ 8 ohms

E-250DK Bag End Diaphragm, one year warranty

Loudspeaker CD Tweeter (OBSOLETE)
This was used in discontinued models TA12C, TA12JRC, TA15-I, D10BX-D

E-500 Diaphragm

E-600DK Diaphragm

Compression Driver NEO 1.4, 16 Ohms

E-808 Horn, 60 X 90 REV 4.3 Horn

E-828 HI Frequency Driver Bag End Replacement Part for the Opal2 and Crystal2 Gem series high output installation loudspeaker systems

EL-21A Professional Transducer

Handle Bar with Logoplate

IP-300 Bag End Infra 300 App and F1 Amp Assembly

IP-700

Bag End 700 Amp and F1 Preamp Assembly
Replacement part for the IPD10E-I, IPS12E-N and IPS18E-N

IP-MO Bag End Infra Powered MO Amp and F1 Preamp Assembly

M6X0-4 Passive Crossover, this has been replaced with the M6X0-5

Amplifier Minima One Pre-amp Only

P-300 300 Amp and F1 Preamp assembly

P-700 Bag End 700 Amp and F1 Preamp Assembly

P-MO Bag End MO Amp and F1 Preamp Assembly

T12X-2 Crossover for Bag End TA12 (OBSOLETE)

Jackplate Cup, Only Used on M-6

Jackplate Assembly – CD, CDS Series (Venus and Neptune Models)

Z-352 Jackplate Assembly – CD/CDS BASS Series

Jackplate Assy – CDS-215

Speak On Jack Plate Assembly
4″ x 5″

This Product Is No Longer Available